Jon Link ... GONE??

Off topic/not diesel related

Moderators: Greenleaf, BC847, Richie O

Jon Link ... GONE??

Postby Richie O » Thu Mar 18, 2010 10:18 pm

Saw this today on another forum. Here is a paste out of a newspaper.

FAIR OAKS, Ind. — Police say a Michigan man on a hunting trip to northwestern Indiana died after he was hit by a pickup truck driven by a fellow hunter.


The Newton County Sheriff's Department says 42-year-old Jonathan Link of Conklin, Mich., was hunting on private property in a rural area about 30 miles south of Gary when he was struck Sunday morning.


The department say the other hunter drove Link a couple miles to a convenience store at Interstate 65 and Indiana 14, where police were called. Link died after he arrived at Jasper County Hospital in Rensselaer.


Police said the circumstances remained under investigation




Here is the link source. http://www.lansingstatejournal.com/arti ... 303080003/
















.
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England

Re: Jon Link ... GONE??

Postby Richie O » Thu Mar 18, 2010 10:29 pm

1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England

Re: Jon Link ... GONE??

Postby Richie O » Thu Mar 18, 2010 10:35 pm

1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Re: Jon Link ... GONE??

Postby pulltilbroke » Thu Mar 18, 2010 10:39 pm

Yep, Saw this on Comp last week

Terrible news


RIP Jon
90 W250 reg cab, Modified knuder valve, reversed reciprocting dinglearm adjusted, High volume flux capacitor,upgraded whirlygig, A clutch and a hitch
93 W350 ext cab dually, getrag and a few adjustments
pulltilbroke
14mm rotor
 
Posts: 1410
Joined: Fri Jan 18, 2008 1:20 am
Location: Eagle Ne
Top


Return to Lounge

Who is online

Users browsing this forum: No registered users and 4 guests