hey I really like your site there is a ton of good info here. I'm from chippewa falls wisconsin. I've got a few 1st gens. A 93 D150 with the magnum and a 5 spd an 86 ramcharger that came from california and my newest edition a 93 D350 cummins with the getrag and a dump box I've been working on the body for the most part getting closer to paint but when I get bored I do some of the fun stuff I've just messed with a couple of the easy stuff first like bhaf fuel pin rotated timing bump I haven't touched the fuel screw yet as the previous owner did so I think I'm gonna leave it ill try to get some pictures of my stuff thanks. For reading my rant . By the way I work at indian plating so I can hard chrome small parts and on break so if you got some stuff you think you want plated email me that's the best way to contact me as I haven't figured everything out yet (dodgebullit@vzw.blackberry.net)
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.comfull line dealer, if you don't see it please ask.