1stGen.org

THE place for 1st gens

Skip to content

WHEELS HELP`

everything but the drivetrain

Moderators: Greenleaf, BC847, Richie O

Post a reply

WHEELS HELP`

Postby ivel_86 » Wed Dec 22, 2010 5:44 pm

Alright I got the green light to get tires and wheels for my '93 W250.... well I CANNOT find anything I have been looking online all night and found not much of anything anyone got any ideas on were I can find some nice black wheels?? Thanks so much for anyones help.
US ARMY SGT
OIF 08-09

'93 W250, 4in Sky Lacker 35in Kelly Safari, Pump turned up, Fuel Pin ground, Pyro and Boost gauges, Straight piped, Home made air cleaner assembly.
ivel_86
fuel screw!!!!
 
Posts: 69
Joined: Thu Dec 02, 2010 11:13 am
Location: Sebewaing, MI
Top

Re: WHEELS HELP`

Postby PRINCETON_JAKE » Wed Dec 22, 2010 5:49 pm

MOST 8bolt by 6.5 inch patter rims will fit. Most places just dont list them for our old trucks. I have 18" Mazzi Hulk rims on my 1992.
1992 cummins, 2wd, A518, WH1c, 60mm,12cm housing, fuel screws maxxed, fuel pin turned and ground, 3200rpm spring, big Amsoil air filter, 4" stack, timming bumped, piston lift pump, Bosch 190's, 18" Maxxi Hulk rims, and Nitto Terra Grapplers.
PRINCETON_JAKE
fuel screw!!!!
 
Posts: 133
Joined: Sat Jan 09, 2010 3:39 pm
Top

Re: WHEELS HELP`

Postby ivel_86 » Wed Dec 22, 2010 5:54 pm

Yeah but what about my locking hubs???? I am sorry if these are dumb questions. I finaly got my dream truck and now it is becoming aperant on how little I know about it. I mean my '04 duramx I could get anything from just about any website... My W250 is a much diffrent story.
US ARMY SGT
OIF 08-09

'93 W250, 4in Sky Lacker 35in Kelly Safari, Pump turned up, Fuel Pin ground, Pyro and Boost gauges, Straight piped, Home made air cleaner assembly.
ivel_86
fuel screw!!!!
 
Posts: 69
Joined: Thu Dec 02, 2010 11:13 am
Location: Sebewaing, MI
Top

Re: WHEELS HELP`

Postby manyholes » Wed Dec 22, 2010 8:18 pm

Don't put the front center caps on
1990 W250 dodge ex cab, LB, work in progress. truck was originally reg cab/lb, ex cab is an add on.fuel pin turned, 30psi, bhaf, straight piped 3", new rear springs with shackle flip, 4" lift front, crossover steering, waiting on piston lp, c/c s/b conversion, turbo upgrade and intercooler install
manyholes
fuel screw!!!!
 
Posts: 83
Joined: Sat Oct 16, 2010 8:30 pm
Top

Re: WHEELS HELP`

Postby 1STGENFARMBOY » Wed Dec 22, 2010 8:56 pm

You mite have to get a little creative with the caps, me and a couple others on this site
have used 3rd gen wheels and drilled out the center for the lock out's.

Image

Dar
93 W250 STD CAB, AUTO 3.55, GAUGES, 80HP DDP STICKS, DENNY T ,16CM HOUSING, 60MM GILLETT, VE MAXED,BHAF, BHFF, 366 SPRING,P/S INTERCOOLER, TIMS COOLER TUBS, TIMMING 1/8 BUMP,4in TURBO BACK TO DUEL 5IN STACKS,33 12.50 BFG, HOLLEY BLACK, CONVERTER COOMING.
User avatar
1STGENFARMBOY
14mm rotor
 
Posts: 2089
Joined: Mon Sep 28, 2009 2:23 pm
Location: PITTSBURG ILL
Top

Re: WHEELS HELP`

Postby huntinguy » Sun Jan 02, 2011 8:25 am

If it fits on a 98 or earlyer ford it will fit on our trucks. The center hole is to small on chevy rims.
89 non-I/C W-250, flatbed. 4" turbo back. Ground fuel pin, AFC tuning.
User avatar
huntinguy
fuel screw!!!!
 
Posts: 97
Joined: Fri Dec 11, 2009 9:01 am
Top

Re: WHEELS HELP`

Postby IowaCummins » Sun Jan 02, 2011 2:29 pm

Most aftermarket rims will fit. if they are specific for chevy they can be machined to take a tad bit out of the hub so it will fit our hub. some guys do it with a 4" grinder. im running incubus crushers on mine, 18x9
1993 Dodge W250 Reg cab. Auto, .010" headgasket, A1 Studs. Just the Lil Ole VE pump Fuelin 7x.014's turnin the Aurora 3000 turbo. 5" Turbo back to Duals. :cbadge:
IowaCummins
14mm rotor
 
Posts: 522
Joined: Tue Mar 17, 2009 2:16 pm
Location: council bluffs iowa
Top
Post a reply

Return to Chassis

Who is online

Users browsing this forum: No registered users and 28 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
cron