I'm working on finishing up rebuilding a dual rear output NP205. In the process of buttoning it up, I double checked to make sure everything turns as it should, no noise, etc. My question involves the input from the trans. I thought the input turned at a 1:1 revolution with the output in high range, but mine doesn't. It's more like 1-1/4 to 1-1/2:1 to the output in high range.
Never thought to check that before I started, so I have no base line to go by. Anybody have a spare np205 they could double check for me, or know off the top of there head?
Thanks
Edit,
In building this case, I swapped in a 27 spline input, running the original 32 spline upper rear output, as well as the np205 idler gear. I swapped in the front and rear output out of an np200, which are 10 spline, as well as the 2wd/4wd shift fork and rod. Everything turns free, just seems like it's not 1:1 in high range