1stGen.org

THE place for 1st gens

Skip to content

getrag rebuild.

How they work, how they don't work, and how to fix them

Moderators: Greenleaf, BC847, Richie O

Post a reply

Postby mprmn08 » Wed Feb 18, 2009 6:57 pm

nobody knows?? :shock:
93 w250 reg cab. rigged up stock downpipe to 4 inch to 5 inch exhaust from p.o. mild pump tweaks and all other stock for now. Project "smoke a little smoke". www.c-techperformance.com
User avatar
mprmn08
14mm rotor
 
Posts: 507
Joined: Fri Apr 11, 2008 12:12 pm
Location: Grandville, MI
Top

Postby MMiller » Wed Feb 18, 2009 7:39 pm

I've never lost mine, or had any fail to have to buy any, so I really don't know. I'd call Zumbrota gear in Minnesota. http://zbag.com/ is thier webcite. That's were I get my getrag parts, I've got about 20,000 miles on mine now since I was last into it.

Michael
1993 W250, 3.55, NV5600 , Con O, bosch 185's, 4" exhaust, Super 40, pump tweaks, ground pin, Smokehouse air intake, Hamilton Cam,
1985 D350, Crew Cab, 92 cummins and a 518. 47rh to be built and installed along with 3.55 LS Dana 80
MMiller
fuel screw!!!!
 
Posts: 391
Joined: Mon Jan 08, 2007 6:26 am
Location: Lenox Ia
Top

Postby mprmn08 » Thu Feb 19, 2009 5:22 pm

does no body know what im talkin about or no body know what to do? :?
93 w250 reg cab. rigged up stock downpipe to 4 inch to 5 inch exhaust from p.o. mild pump tweaks and all other stock for now. Project "smoke a little smoke". www.c-techperformance.com
User avatar
mprmn08
14mm rotor
 
Posts: 507
Joined: Fri Apr 11, 2008 12:12 pm
Location: Grandville, MI
Top

Postby pulltilbroke » Thu Feb 19, 2009 6:45 pm

I know exactly what your talkin about I got a set of em sittin here in a magnetic tray along with a bunch of other getrag parts but there for the old mans tranny

I don't know where you would get em
90 W250 reg cab, Modified knuder valve, reversed reciprocting dinglearm adjusted, High volume flux capacitor,upgraded whirlygig, A clutch and a hitch
93 W350 ext cab dually, getrag and a few adjustments
pulltilbroke
14mm rotor
 
Posts: 1410
Joined: Fri Jan 18, 2008 1:20 am
Location: Eagle Ne
Top

Postby dpuckett » Thu Feb 19, 2009 7:33 pm

ZBAG has them- keeper, spring, and ball, for like $3 a set. I bought a few extras last time I needed some, but you'd be quicker giving Craig a call-I wont be home til Tues at the soonest. Google him.

Dan
His- 93 W250 club cab LE, auto to Getrag conversion, piston lift pump, 3.54 LSD. 400k+
Hers- 04 QC 4x4. Built auto, Triple Dog, Air Dog. Funny Round truck that aint so quiet.
dpuckett
14mm rotor
 
Posts: 2196
Joined: Wed Jan 03, 2007 4:33 pm
Location: Perryville MO
Top

Postby mprmn08 » Fri Feb 20, 2009 7:06 am

awesome, thanks dpucket. i called them first thing today and they had it. its on its way to my house now. should hopefully have the trans back together and in it and running next week. :thumleft: :rock:
93 w250 reg cab. rigged up stock downpipe to 4 inch to 5 inch exhaust from p.o. mild pump tweaks and all other stock for now. Project "smoke a little smoke". www.c-techperformance.com
User avatar
mprmn08
14mm rotor
 
Posts: 507
Joined: Fri Apr 11, 2008 12:12 pm
Location: Grandville, MI
Top
Previous
Post a reply

Return to Transmission

Who is online

Users browsing this forum: No registered users and 52 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group