My 1992 Dodge D250 Diesel needs a new fuel assembly or I need to fix what I have.
NEW OPTION
I've been told that the old new fuel assembly that will work on this truck is a Carter P74699R
But the problem is that the new assembly is a 6 pin connector instead of the 4 pin on the old assembly.
FIX OPTION
The contacts on the sending unit are not touching the grid. I think I can fix this, but I will have to test with an Ohm meter. Do you know what Ohms it should be reading?
The other problem is about one of the two strainers. There's one strainer that is plastic and about 4" diameter and 1" thick. This obviously filters the fuel.
But there is another strainer on the inside of the assembly at the bottom. it's about 3-4" in diameter and has a 1" diameter hole in the center. And it's about 1/4" thick. It also has a rubber part that acts like a valve. I think it allows fuel to go one way. Anyway, I sprayed it with brake cleaner and it ruined the rubber flapper valve.
Can I use the pump without the smaller screen?
Is there a rubber piece I can buy somewhere to replace that one?
Thanks
Dean