Body mount bolt sleeve

both inside and out

Moderators: Greenleaf, BC847, Richie O

Body mount bolt sleeve

Postby SledNeck91604 » Wed May 21, 2014 6:30 pm

Hey guys, Im doing a little restoration. Im using a '90 frame with an '89 cab and a few parts off of an '86. My issue is i don't have a reliable measurement for the bolt sleeves. The 90s are rotted, the 89s seem to be too short at 2.350/2.720" and the 86s are too long for sure at 2.875/3.187".Hopefully someone else has some measurements.
SledNeck91604
fuel pin?
 
Posts: 23
Joined: Sat Aug 07, 2010 9:53 am

Re: Body mount bolt sleeve

Postby SledNeck91604 » Fri Jul 13, 2018 6:57 pm

Anyone have their truck apart?
SledNeck91604
fuel pin?
 
Posts: 23
Joined: Sat Aug 07, 2010 9:53 am

Re: Body mount bolt sleeve

Postby PToombs » Sat Jul 14, 2018 4:39 pm

I just had a fender off, what do you need?
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: Body mount bolt sleeve

Postby SledNeck91604 » Sat Jul 14, 2018 5:07 pm

I need the proper length for the metal sleeves in the body mounts.
Last edited by SledNeck91604 on Mon Jul 16, 2018 4:24 pm, edited 1 time in total.
SledNeck91604
fuel pin?
 
Posts: 23
Joined: Sat Aug 07, 2010 9:53 am
Top

Re: Body mount bolt sleeve

Postby PToombs » Mon Jul 16, 2018 4:11 pm

Sorry Chief, can't help you with that. Do you have the mounts out? Stack them up and measure the height, that should be close.

I just went and looked in my parts book, it doesn't show the sleeve, just the rubbers.
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: Body mount bolt sleeve

Postby SledNeck91604 » Mon Jul 16, 2018 4:24 pm

Thanks for looking!
SledNeck91604
fuel pin?
 
Posts: 23
Joined: Sat Aug 07, 2010 9:53 am
Top


Return to Body

Who is online

Users browsing this forum: No registered users and 5 guests