I'm not sure yet. Probably just move the springs in to begin with and put them under the rear for now then 4 link it if I don't like the results later.
Big Andy 1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
Really sweet. If I had any pictures of the '92 D250 I just picked up, I could give you some competition in the ugly duckling category. The trucks name is Daphne. The previous owner named her. I have some vanity plates on order at the RMV with the trucks name. My 13 year old daughter who is insanely in love with pickup trucks won't even get in it.
If it jams, force it. If it breaks, it needed to be fixed anyway.
Thanks, everyone says I should leave it brown but I just can't do it. When she is done in a few years it will be light blue. Hope to pull the doghouse and the engine/trans out of it today.
Big Andy 1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
Well pulled the doghouse, engin and trans a little while ago with help from my brother. Had it apart and our mess cleaned up in a hour an 45 minutes. I now need to pull the cummins off the frame and start pulling crossmembers and such to swap.
Big Andy 1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
Well pulled the cummins off the frame section and was happy to see the crossmembers were so similar. I'm going to use the half ton crossmember since I found a few huge cracks on the 93's. I'm going to preasure was everything tomorrow and try to get the engine set down in the Duck. 93 crossmember 83 Crossmember
Big Andy 1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
Oh and by-the-way, I was digging around a few hot rod sites and came across the plans to make a set of knock off cal-tracs. I'm gonna build some for my S10. Might save a few dollars for you. http://www.hotrodsandhemis.com/Traction.html