Drive Shaft measurements

Cummins Conversion & Builds

Moderators: Greenleaf, BC847, Richie O

Drive Shaft measurements

Postby Collers9640 » Mon Mar 10, 2014 4:28 am

I need to get drive shafts made, Anybody happen to have the measurements for driveshafts for a 1992 Ram 4x4 Clubcab manual Transmission
77’ W200 Cummins- Auto, BHAF, 4” Exhaust
91.5 W250 Cummins Conversion- PS I/C, pump maxed, Red Oak Diesel Injectors, Coolertubz, pump advanced 1/8", 3" elbow, 3200 Spring, Piston Lift Pump, KDP fixed, DennyT pin, HX35, 4in Downpipe, BHAF, Heater Grid Delete, Alcan springs, Bilstein Shocks
1984 D350 Crew Cab (Future Cummins Project)
Collers9640
fuel screw!!!!
 
Posts: 171
Joined: Wed Feb 24, 2010 4:25 pm
Location: Charleston SC

Re: Drive Shaft measurements

Postby dazedandconfused » Mon Mar 10, 2014 5:55 am

Its going to be 2 piece shaft. I'll see if I still have the front piece laying around.
Big Andy
1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
User avatar
dazedandconfused
14mm rotor
 
Posts: 6119
Joined: Thu Apr 05, 2007 6:25 pm
Location: Walton, Kentucky

Re: Drive Shaft measurements

Postby Collers9640 » Mon Mar 10, 2014 12:33 pm

Yeap i Know its gonna have to be a 2 piece shaft. I guess I need to know how long the forward section of the shaft is so i know where to mount the carrier bearing.
77’ W200 Cummins- Auto, BHAF, 4” Exhaust
91.5 W250 Cummins Conversion- PS I/C, pump maxed, Red Oak Diesel Injectors, Coolertubz, pump advanced 1/8", 3" elbow, 3200 Spring, Piston Lift Pump, KDP fixed, DennyT pin, HX35, 4in Downpipe, BHAF, Heater Grid Delete, Alcan springs, Bilstein Shocks
1984 D350 Crew Cab (Future Cummins Project)
Collers9640
fuel screw!!!!
 
Posts: 171
Joined: Wed Feb 24, 2010 4:25 pm
Location: Charleston SC
Top


Return to Conversions & Builds

Who is online

Users browsing this forum: No registered users and 14 guests

cron