93oneton 2.0

Cummins Conversion & Builds

Moderators: Greenleaf, BC847, Richie O

Re: 93oneton 2.0

Postby PToombs » Mon Jun 27, 2016 5:45 pm

Swamp cooler huh? :lol: Like an air conditioner?
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!

Re: 93oneton 2.0

Postby 93oneton » Mon Jun 27, 2016 5:56 pm

PToombs wrote:Swamp cooler huh? :lol: Like an air conditioner?



Yes sir, fill it with water and ice and then pump the water over a horse hair matt. It pushes air over it when moving into the cab
Shit happens
93oneton
fuel screw!!!!
 
Posts: 309
Joined: Thu Oct 11, 2012 5:04 pm
Location: yakima wa

Re: 93oneton 2.0

Postby 93oneton » Mon Jun 27, 2016 9:07 pm

3 down 1 to go! Then off to sandblasting to get the jam areas done



Image

Image
Shit happens
93oneton
fuel screw!!!!
 
Posts: 309
Joined: Thu Oct 11, 2012 5:04 pm
Location: yakima wa
Top

Re: 93oneton 2.0

Postby 93oneton » Wed Jun 29, 2016 5:47 am

Got my bed and tailgate back from the sandblaster today. Drop the tailgate, my other rear fender, headlight surrounds, andthe black parts of the window Channel off of the painter. Dropped the doors and grill inserts off at the blasters. I brought the bed home so i can finish the sides. They blasted the hard to reach spots and inside for my bed liner.
Image

Image
Shit happens
93oneton
fuel screw!!!!
 
Posts: 309
Joined: Thu Oct 11, 2012 5:04 pm
Location: yakima wa
Top

Re: 93oneton 2.0

Postby 93oneton » Sat Jul 02, 2016 10:46 pm

3200 gov spring installed, m&h timing special, fixed rear light harness from stretching the frame and got the rear seats mounted up. Still lots to do, but gettin closer!
Image

Image

Image

Image

Image

Image
Shit happens
93oneton
fuel screw!!!!
 
Posts: 309
Joined: Thu Oct 11, 2012 5:04 pm
Location: yakima wa
Top

Re: 93oneton 2.0

Postby CumminsPower59 » Wed Jul 06, 2016 1:27 pm

Very nice :thumright:
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: 93oneton 2.0

Postby dazedandconfused » Wed Jul 06, 2016 1:37 pm

How much headroom do you have in the back? They look like there sitting high? I do like them though.
Big Andy
1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
User avatar
dazedandconfused
14mm rotor
 
Posts: 6119
Joined: Thu Apr 05, 2007 6:25 pm
Location: Walton, Kentucky
Top

Re: 93oneton 2.0

Postby 93oneton » Wed Jul 06, 2016 1:45 pm

My dad is 6'3" and he has a couple inches. They do sit alittle taller. But they are way more comfortable from them being taller. You legs arent bent at the knee
Shit happens
93oneton
fuel screw!!!!
 
Posts: 309
Joined: Thu Oct 11, 2012 5:04 pm
Location: yakima wa
Top

Re: 93oneton 2.0

Postby 93oneton » Thu Jul 07, 2016 5:50 pm

While sitting in the hospital room and the babies are sleepin i ordered some parts. Hungry diesel fuel pin, some more eastwood vynal dye and the stuff im goin to try and black chrome some parts. I hope to check in on the paint shop next week to see if any progress is bein made
Shit happens
93oneton
fuel screw!!!!
 
Posts: 309
Joined: Thu Oct 11, 2012 5:04 pm
Location: yakima wa
Top

Re: 93oneton 2.0

Postby Farmboy » Mon Jul 11, 2016 8:16 am

You sure you don't want to sell this thing when you get it done?!?! This thing is going to be awesome. I have the same issue as you now. Don't all fit in the truck anymore. This one would sure fit the bill.. HAHA

Congrats on the new twins by the way.
1990 W350 4X4 NOW INTERCOOLED 5-speed. Boost/Pyro. Few light tweaks to the pump. Now a dually with an aluminum flatbed!!
User avatar
Farmboy
14mm rotor
 
Posts: 620
Joined: Wed Dec 17, 2008 11:47 am
Location: Between the corn fields of Ohio
Top

Re: 93oneton 2.0

Postby 93oneton » Mon Jul 11, 2016 9:46 am

Farmboy wrote:You sure you don't want to sell this thing when you get it done?!?! This thing is going to be awesome. I have the same issue as you now. Don't all fit in the truck anymore. This one would sure fit the bill.. HAHA

Congrats on the new twins by the way.


Thanks! Im affraid the family truckster is here to stay lol.
Shit happens
93oneton
fuel screw!!!!
 
Posts: 309
Joined: Thu Oct 11, 2012 5:04 pm
Location: yakima wa
Top

Re: 93oneton 2.0

Postby 93oneton » Tue Jul 12, 2016 10:56 pm

Havnt had much time since the twins came home lol, but i can order parts still!
Placed a big order of window seal stuff from lmc today. Also had goodies show up from one of our fellow members. Ill get it put in tomorrow!

Image
Shit happens
93oneton
fuel screw!!!!
 
Posts: 309
Joined: Thu Oct 11, 2012 5:04 pm
Location: yakima wa
Top

Re: 93oneton 2.0

Postby 93oneton » Thu Jul 14, 2016 5:58 pm

Most nerve racking part of the entire build!

Image

Image

Image
Shit happens
93oneton
fuel screw!!!!
 
Posts: 309
Joined: Thu Oct 11, 2012 5:04 pm
Location: yakima wa
Top

Re: 93oneton 2.0

Postby CumminsPower59 » Fri Jul 15, 2016 8:05 am

I cheated a little when I installed the flush mounted button lights on my pile, I got a roof skin off of DodgeFreak, put it on top of the cab and marked the locations. I moved the openings forward an inch or so, so the lights had a slightly forward angle to them. Most people don't even notice they are there until they are lit.
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: 93oneton 2.0

Postby 93oneton » Fri Jul 15, 2016 4:41 pm

Lots done today! The nother in law came over to help out so i got some crew cab time! Should probably taken a nap but i was to excited.

Got my chevy over head console fitted. Still needs sanded and final fit before i re wrap the cloth on it. It fit ok as it was. Trimmed some stock mounts off to get a better feel, took some measurements and made a cardboard template. From there i cut apart the second console i had to make the filler pieces. Held them in place and filled front and back with j.b. weld. Once drie ill sand down the seams and finish fit them. Then it will get wrapped in black cloth.

Image

Image

Image

Image

Image
Shit happens
93oneton
fuel screw!!!!
 
Posts: 309
Joined: Thu Oct 11, 2012 5:04 pm
Location: yakima wa
Top

PreviousNext

Return to Conversions & Builds

Who is online

Users browsing this forum: No registered users and 11 guests

cron