he351cw arrived in the mail now what......

How to make it go fast

Moderators: Greenleaf, KTA, BC847, Richie O

he351cw arrived in the mail now what......

Postby 78fordf150ranger » Thu Sep 13, 2012 11:12 am

Okay just got my he351cw in the mail,now what injectors?

Truck is a 1993 reg cab long box
Auto trans
4x4
Denny-t stage 2
K and
Straight piped to 5 in stack
3200 gov spring
Pump tweaks star gears bottomed
My elevation 330m above sea level I will not be towing unless it 3500lbs

What injectors.would you guys suggest smoke isn't a huge issue
78fordf150ranger
fuel screw!!!!
 
Posts: 39
Joined: Sat Jun 09, 2012 3:00 pm
Location: Kelowna B.C

Re: he351cw arrived in the mail now what......

Postby tampabayBill » Thu Sep 13, 2012 12:07 pm

What do you plan to do with your truck ? I would guess 5x12, 5x13, 5x14 would do well with your current sig.
93D250 CC LE, 62/65/13 S300, PDR cam,DDP3's, B&D IP, 366 GSK, M3 & timing device, Air Dog 150, Cooler tubes, 3 piece manifold, BHAF & 4" tbe, ported & O ringed, ARP studs, 60# springs 47RH & 3 disc conv., fp, aux trans cooler, fluid damper, 3:54 D70 w/trac-lok, rear sway bar, gauges = egt,boost, tach, 47RH & diff. temps.
Twins coming soon!
tampabayBill
fuel screw!!!!
 
Posts: 293
Joined: Sat Oct 09, 2010 7:51 am
Location: New Port Richey, Fla.

Re: he351cw arrived in the mail now what......

Postby 78fordf150ranger » Thu Sep 13, 2012 12:14 pm

Daily driver/play toy
78fordf150ranger
fuel screw!!!!
 
Posts: 39
Joined: Sat Jun 09, 2012 3:00 pm
Location: Kelowna B.C
Top

Re: he351cw arrived in the mail now what......

Postby BILTIT » Thu Sep 13, 2012 12:19 pm

I would install the turbo and try it out first :P

I have a set of 5x14's coming for my setup, i think its on the upper end of what i want because i do tow and don't like smoke.
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top

Re: he351cw arrived in the mail now what......

Postby cmann250 » Thu Sep 13, 2012 12:21 pm

It's cliche, but put money in the transmission. Power and torque are cool to have, but getting it to the ground efficiently is what will make the most difference to the seat-of-the-pants dyno
Caleb, Certified Shade Tree Mechanic Extraordinaire :mrgreen:
The 1stgen.org black sheep

"Whatever!" - Coach Jerry Smith
cmann250
14mm rotor
 
Posts: 4059
Joined: Fri May 20, 2011 5:25 pm
Location: Lafayette, IN
Top

Re: he351cw arrived in the mail now what......

Postby tampabayBill » Fri Sep 14, 2012 6:50 am

X2, a TransGo valvebody kit and a good convertor make a real difference.
93D250 CC LE, 62/65/13 S300, PDR cam,DDP3's, B&D IP, 366 GSK, M3 & timing device, Air Dog 150, Cooler tubes, 3 piece manifold, BHAF & 4" tbe, ported & O ringed, ARP studs, 60# springs 47RH & 3 disc conv., fp, aux trans cooler, fluid damper, 3:54 D70 w/trac-lok, rear sway bar, gauges = egt,boost, tach, 47RH & diff. temps.
Twins coming soon!
tampabayBill
fuel screw!!!!
 
Posts: 293
Joined: Sat Oct 09, 2010 7:51 am
Location: New Port Richey, Fla.
Top

Re: he351cw arrived in the mail now what......

Postby bmoeller » Sat Sep 15, 2012 5:06 pm

cmann250 wrote:It's cliche, but put money in the transmission. Power and torque are cool to have, but getting it to the ground efficiently is what will make the most difference to the seat-of-the-pants dyno


Not only "seat of the pants", but in real numbers too. A non-lock up t/c, and trying to slam more power through it will be a waste.
NEW- '82 CREW cab dually. Cummins, NV5600, 205, D60/D80. :D Work in progress......

'93 W350, CTD, ext cab, 5spd., HTT modded H1C, 4" exhaust, Kelderman single bag. 537k and counting!

SOLD- '92 W250, CTD, ext cab, 5spd

SOLD- '99 3500, SO CTD, 5spd

Traded off- '97 3500 CTD, 416hp/892tq.

Obama loves America, like OJ loved Nicole...................
User avatar
bmoeller
14mm rotor
 
Posts: 1448
Joined: Sat Feb 27, 2010 7:22 am
Location: NW IL
Top


Return to The good stuff

Who is online

Users browsing this forum: No registered users and 5 guests