Turbo upgrade options????

[1993CTD]

I am ready to do a turbo upgrade on my 93 but Im not in the market for 1000 or higher turbo. Just looking to do somthing for better towing capabilities and a little more sthi in her pants. I was looking at the gds 60 mm upgrade but didn't know how the spool would be with the stock 18 housing would be... All opinions are appreciated thanks

[cmann250]

Auto or manual transmission?

[1993CTD]

Manual

[BILTIT]

he351cw, hands down the best low buck upgrade for a manual.

[1993CTD]

What is that off originally? And is it a take off put on or is there some modifiyin to get it to fit right?

[oldestof11]

04.5 to 07 5.9l Cummins pickups.

[1993CTD]

What all is involved in makeon one fit

[BILTIT]

Wastgate needs to be tacked or wired shut, compressor housing needs to be clocked slightly.

2 of 4 holes on turbo ex flange need to be opened up slightly to allow studs to fit through.

You will need these:

http://www.dieselautopower.com/he351_v_ ... 0clamp.htm
http://www.dieselautopower.com/product_ ... flange.htm
http://www.dieselautopower.com/product_ ... tapped.htm
http://www.dieselautopower.com/product_ ... 949530.htm


One of these (and clamps) depending if you run coolertubz or not, also recomend installing a powerstrok intercooler when doing this:

http://www.siliconeintakes.com/product_ ... 28961d66c8
http://www.siliconeintakes.com/product_ ... 28961d66c8

Here is mine:

[1993CTD]

Ok dosent seem to complicated, but I didnt plan on running a stroker intercooler would that still be alright? and I do have 4 in Exhaust from turbo back so would I still need to weld the flange on there?

[BILTIT]

You will still need the flange, its different than your current one. You dont need to run the PS IC but it is a good upgrade to do.

[1993CTD]

Ok so now where is the best place to find a he351cw i have checked my local craigslist and didn't find sthi and I wasn't sure about eBay beings there alot of Chinese knock offs on there... And if I cant come up with that turbo what's the next best setup?

[BILTIT]

Dont search for a "he351cw" locally, search for a turbo off a dodge 0.4-07. People have no idea what turbo they have on there trucks, only know what it came from.


Other than that a hx35 is probably your best cheap option.

[1993CTD]

hell ya looks good man!!!! im lookin around for one but not alot of them out there just laying around ya know...