by Remps » Tue Mar 05, 2019 5:20 am
From what I've read, I think the turbine wheel on the h2e is 70+ mm on the small end, big enough with a big exhaust housing to do what you want to do. I've also read that these come with anywhere from a 63-71 mm compressor inducer. Imho, with about a 66 mm or larger compressor inducer, it would work ok in a small set of twins. I take it you are running a p-pump for 550-600 hp?
'90 D250 R/C,727,IC,6x.009's,1/8" bump,fuel psi,straight pipe w/5" stack.
'90 W250 R/C,47rh,K@N,HX35,1/8" bump,2nd gen IC,boost,egt,trans temp.3.07's.
'96 2500 S/C L/B,2wd,NV5600,3.54 L/S,cai,egt,pacbrake,mbrp exhaust,10 plate.
Bring back the Bank of Canada, PRE- 1974.