'90 W250--'89/91/92 Ramcharger

[Tacoclaw]

I wouldn't mind twins, but I doubt I'd be able to get them spooled with my displacement.

[AHineman]

Just sing them the song "I'm not as good as I once was, but I'm as good once as I ever was"...

[Tacoclaw]

I would, but I'm too busy singing that song to my truck every night.

[TheTowingCowboy]

I thought this was the song your truck heard the most of

http://www.youtube.com/watch?v=pDY6bWT5oTM

[Tacoclaw]

Sheeeeeeeit, I know you saw those pics a couple pages back. That was a legit trail I was on.

Since I'm here, I'm still waiting on word back on a compressor housing. I gave the fellow my wheel sizes, and coincidentally enough it seems to be under 62mm.

61mm inlet of compressor housing
59.8mm inducer
87.7mm exducer.


The turbo has an odd number of blades, so the inducer is kind of hard to get.

[TheTowingCowboy]

Sheeeeeeeit, I know you saw those pics a couple pages back. That was a legit trail I was on.

Since I'm here, I'm still waiting on word back on a compressor housing. I gave the fellow my wheel sizes, and coincidentally enough it seems to be under 62mm.

61mm inlet of compressor housing
59.8mm inducer
87.7mm exducer.


The turbo has an odd number of blades, so the inducer is kind of hard to get.

With it being a 61mm it may be one that built specially for the 2.6 pulling class. IDK and need a caliper to measure it bud? Lol got one or two or five!

[Tacoclaw]

Bitch please, I used a Vernier caliper to measure that. You probably don't even know what that is.

[AHineman]

With it being a 61mm it may be one that built specially for the 2.6 pulling class. IDK and need a caliper to measure it bud? Lol got one or two or five!

I thought 2.6" was about 66mm.

[TheTowingCowboy]

With it being a 61mm it may be one that built specially for the 2.6 pulling class. IDK and need a caliper to measure it bud? Lol got one or two or five!

I thought 2.6" was about 66mm.

You might be right I just know there are companies when you order a certain size turbo they ask if its to 2.6 pulling, and by marking that you actually get a little bit smaller wheel and housing.

And Levi yes I do lol I will have to show you the small machine shop in the barn lol.

[Tacoclaw]

*cough* 1"=25.4mm *cough*

2.6"= 66.04mm

[AHineman]

hmmmm,

Levi actually agreeing with me for once.

[oldestof11]

*fart* 1"=25.4mm *fart*

2.6"= 66.04mm

Talking out your azz again?

[Tacoclaw]

Heh, if I hadn't had the old Microsoft calculator it would have looked more like:

2.6"=5822453rgidhsw6196.r34mm.

[TheTowingCowboy]

Heh, if I hadn't had the old Microsoft calculator it would have looked more like:

2.6"=5822453rgidhsw6196.r34mm.

This is his normal math skill by the way

[ahale2772]

Yowzers that skinny middleafterish cooler looks restrictive.... think its gona hold the pressures your putting it through?

Pete's comment was awesome