2014 BS and Chat Thread!

Off topic/not diesel related

Moderators: Greenleaf, BC847, Richie O

Re: 2014 BS and Chat Thread!

Postby fatty » Sun Feb 23, 2014 10:07 pm

After I moved my trans and tcase around a bit I looked up the dry weights online. Best I could tell the 518 weighs about 170 lbs and the 205 is 130.
91.5 w250
fatty
14mm rotor
 
Posts: 803
Joined: Tue Nov 04, 2008 8:52 pm
Location: Washington

Re: 2014 BS and Chat Thread!

Postby RCCUMMINS89 » Sun Feb 23, 2014 10:16 pm

Yep, that's pretty heavy. I know a 205 is the hardest thing I've ever done.... meaning that I picked mine up and by myself put it back in my truck (on 37" tires). It was without a doubt the most sore I've ever been, because I had it up for probably nearly a half hour. I couldn't get it in right (was hitting my exhaust) and I knew I couldn't get it back up on my knees again if I let it down.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID

Re: 2014 BS and Chat Thread!

Postby DMan1198 » Mon Feb 24, 2014 12:02 am

My ears are ringing.





Maybe it's from the concert that I just got back from. I even had ear plugs (which helped a bunch) and saw some lesbians make out. All in all it was a pretty good night
Ducati- professional nap taker, and thread derailer extraordinaire
Brownie: 80 dodge heavy half. Ghost cummins under the hood, and some sinister plans
The Roo Hunter: 93 w250, lifted, 2 whistle machines, and a bunch of other go fast goodies, uhh..... not there yet
Jaeger: 12 ram 3500. Lifted, exhausted, and fed an excessive quantity of air
The Huntress: 02 Jetta TDI. No muffler, egr, horsepower
DMan1198
14mm rotor
 
Posts: 2262
Joined: Sat Aug 10, 2013 6:26 am
Location: Slave Lake, Alberta
Top

Re: 2014 BS and Chat Thread!

Postby dazedandconfused » Mon Feb 24, 2014 4:48 am

Ugh I so don't want to work anymore. I need to win the lottery. :roll:
Big Andy
1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
User avatar
dazedandconfused
14mm rotor
 
Posts: 6119
Joined: Thu Apr 05, 2007 6:25 pm
Location: Walton, Kentucky
Top

Re: 2014 BS and Chat Thread!

Postby cmann250 » Mon Feb 24, 2014 4:54 am

dazedandconfused wrote:Ugh I so don't want to work anymore. I need to win the lottery. :roll:

Could be worse, you could have school instead. I ain't gettin' paid for that chit! :roll:
Caleb, Certified Shade Tree Mechanic Extraordinaire :mrgreen:
The 1stgen.org black sheep

"Whatever!" - Coach Jerry Smith
cmann250
14mm rotor
 
Posts: 4059
Joined: Fri May 20, 2011 5:25 pm
Location: Lafayette, IN
Top

Re: 2014 BS and Chat Thread!

Postby dazedandconfused » Mon Feb 24, 2014 5:23 am

cmann250 wrote:
dazedandconfused wrote:Ugh I so don't want to work anymore. I need to win the lottery. :roll:

Could be worse, you could have school instead. I ain't gettin' paid for that chit! :roll:


No instead I work at a community college in the Ghetto of Cincinnati. I put up with all the thugs and dipshits thinking they are gods. I may snap on one today.
Big Andy
1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
User avatar
dazedandconfused
14mm rotor
 
Posts: 6119
Joined: Thu Apr 05, 2007 6:25 pm
Location: Walton, Kentucky
Top

Re: 2014 BS and Chat Thread!

Postby cmann250 » Mon Feb 24, 2014 5:24 am

Well I'll pretend I didn't hear that so it'll be manslaughter instead of murder ;)
Caleb, Certified Shade Tree Mechanic Extraordinaire :mrgreen:
The 1stgen.org black sheep

"Whatever!" - Coach Jerry Smith
cmann250
14mm rotor
 
Posts: 4059
Joined: Fri May 20, 2011 5:25 pm
Location: Lafayette, IN
Top

Re: 2014 BS and Chat Thread!

Postby dazedandconfused » Mon Feb 24, 2014 5:38 am

I just yell at them and scare the crap out of them. :mrgreen:
Big Andy
1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
User avatar
dazedandconfused
14mm rotor
 
Posts: 6119
Joined: Thu Apr 05, 2007 6:25 pm
Location: Walton, Kentucky
Top

Re: 2014 BS and Chat Thread!

Postby CumminsPower59 » Mon Feb 24, 2014 6:35 am

I know a 205 is up there about the 150 mark, you can't ship one using standard UPS shipping...their limit is 150. Good thing I'm not paying for the shipping on that turd since it has to go freight. Last one I bought was broken down into two crates, case and center gears in one, all the other stuff in another. 168lbs total was the combined weight :shock:
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: 2014 BS and Chat Thread!

Postby ellis93 » Mon Feb 24, 2014 6:40 am

dazedandconfused wrote:I just yell at them and scare the crap out of them. :mrgreen:

Should have left the beard on your face,it would have helped. Now you just look like a super sized teddy bear. :lol: "their all gonna laugh at you"

Hey grow that beard back and when your poked at by them just snap,go crazy start talking gibberish,as you reach for a rack handle or something. That'd probably do it :lol:

To add for effect,take somejiffy peanut butter and pack it in your crack.....when the time is right or you've got one that wont spoke,smear it in your hair :lol:

That would also convince the judge on an insanity plea ;)
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7762
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

Re: 2014 BS and Chat Thread!

Postby DMan1198 » Mon Feb 24, 2014 6:44 am

Man school is going to suck today. I'm more tired than usual, and the instructors voice is like warm milk. Luckily we have shop for the first half so that won't be as bad
Ducati- professional nap taker, and thread derailer extraordinaire
Brownie: 80 dodge heavy half. Ghost cummins under the hood, and some sinister plans
The Roo Hunter: 93 w250, lifted, 2 whistle machines, and a bunch of other go fast goodies, uhh..... not there yet
Jaeger: 12 ram 3500. Lifted, exhausted, and fed an excessive quantity of air
The Huntress: 02 Jetta TDI. No muffler, egr, horsepower
DMan1198
14mm rotor
 
Posts: 2262
Joined: Sat Aug 10, 2013 6:26 am
Location: Slave Lake, Alberta
Top

Re: 2014 BS and Chat Thread!

Postby dazedandconfused » Mon Feb 24, 2014 7:32 am

I'm whAt? up but even I'm not doing that Ellis. :mrgreen:
Big Andy
1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
User avatar
dazedandconfused
14mm rotor
 
Posts: 6119
Joined: Thu Apr 05, 2007 6:25 pm
Location: Walton, Kentucky
Top

Re: 2014 BS and Chat Thread!

Postby ellis93 » Mon Feb 24, 2014 8:05 am

dazedandconfused wrote:I'm whAt? up but even I'm not doing that Ellis. :mrgreen:

:lol:
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7762
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

Re: 2014 BS and Chat Thread!

Postby ihredneck » Mon Feb 24, 2014 8:12 am

Andy, I think you might appreciate my latest acquisition.

'99 Dodge 1500 RCSB 4x4 with a '02 cummins, 6-speed, 271 DLD, Dana 60/80 axles ....basket case
1992 W350 RCLB 5 Speed Locking 3.54s Flatbed completely stock it's whole life (for now) 117K on the clock (In the middle of a frame off restoration)
1992 W350 RCLB Rag Locking 4.10s Flatbed basket case - All the spare parts left from the other W350 & I still have a whole truck left...
1999 RCSB 1500 24v NV5600
2000 VW Jetta TDI
User avatar
ihredneck
fuel screw!!!!
 
Posts: 308
Joined: Thu Oct 04, 2012 9:25 am
Location: Missouri
Top

Re: 2014 BS and Chat Thread!

Postby DodgeFreak » Mon Feb 24, 2014 3:31 pm

where can I get injector shims??? I'm needing to set up some injectors and in the past I've used stock nozzles and haven't had a problem. But since their bigger I'm thinking I'm going to need to shim them. CPP used to sell a kit and now they don't or I can't find them.
92 D350 Cab and Chassis. Auto stock, wiring gremlins. 330k miles
92 W250 Ext cab rotted completely out. Auto, pump maxed, 215 ppump nozzles, Denny T2 pin.
85 D350 single wheel, converted to cummins, getrag, turned up 2 turns and afc screw flush.
User avatar
DodgeFreak
14mm rotor
 
Posts: 1701
Joined: Sat May 15, 2010 8:14 pm
Location: Iowa
Top

PreviousNext

Return to Lounge

Who is online

Users browsing this forum: No registered users and 2 guests