by Remps » Sat Nov 08, 2014 1:48 pm
I ran one of those 7.3 pumps with a ve and 5x18's. I could pull it down to 14 psi, regulated at 17. Was making 37 psi with a 54 mm h1c. The pump was inline on the factory fuel line, bypassing the diaphragm pump. I think it would have done a little better with a bigger inlet fuel line to the pump. And the ve would not pull fuel through it.
'90 D250 R/C,727,IC,6x.009's,1/8" bump,fuel psi,straight pipe w/5" stack.
'90 W250 R/C,47rh,K@N,HX35,1/8" bump,2nd gen IC,boost,egt,trans temp.3.07's.
'96 2500 S/C L/B,2wd,NV5600,3.54 L/S,cai,egt,pacbrake,mbrp exhaust,10 plate.
Bring back the Bank of Canada, PRE- 1974.