ok finally got my truck on the frame machine at the body shop , and i find out , no frame damage at all , it hit the moose high enough that the cab just shifted over .
anyway here are a few pics on how i fit a 2001 rad and a 2003 intercooler into the rad support of my 1993 , in no particular order .
i may have to cut / dimple the inside hood bracing for clearance of the rad cap .
i shortened the rad suport bushings about 1/16 of a inch and made the round and roughly 1/4" smaller in diameter so they didn't touch the rad .
i'm pretty sure i still have room for the ac cooler , but it will be a very tight fit .
the tranny cooler will have to be moved to a location i have yet to determine ..... (and i may be able to get my hands on a 6 speed out of a 2002 , so it may not even matter ) .
the valance below the grill will need to be cut and tweaked to fit the extension on the intercooler .
i also need to build a bolt on strap to go over the intercooler extension to strengthen the area where i cut the rad support frame .
i still need to make the brackets / mounts for the intercooler .