by Collers9640 » Sat Sep 19, 2015 8:42 pm
I was doing some research on the 5-811x part number and found that the cup size is 1.126 when I went out and measured some on an old 2wd drive I have out back I got 1.188.
So I checked out the Dana spicer site and found the at the diesel size is 1.188 for the three rear drive shaft u-joints.
So the part numbers are like this
5-811x. 1.126 -wrong size. (I'm sure it's fits but would be loose and sloppy)
Spicer #. 5-160x 1.188
Spicer Life # 5-1410x. 1.188
Here's the link to check it out
http://www2.dana.com/expertforms/dek350.aspx
77’ W200 Cummins- Auto, BHAF, 4” Exhaust
91.5 W250 Cummins Conversion- PS I/C, pump maxed, Red Oak Diesel Injectors, Coolertubz, pump advanced 1/8", 3" elbow, 3200 Spring, Piston Lift Pump, KDP fixed, DennyT pin, HX35, 4in Downpipe, BHAF, Heater Grid Delete, Alcan springs, Bilstein Shocks
1984 D350 Crew Cab (Future Cummins Project)