Repaint with color change- help

Moderators: Greenleaf, BC847, Richie O

Repaint with color change- help

Postby Guards Red » Thu Jul 21, 2016 7:12 pm

Hello! First time posting on here. I am going to repaint my 93 W250. It is currently WHITE/ SILVER two- tone and I will be repainting with the factory two tone GREY/ SILVER. I searched on here before posting but am not sure what the correct paint codes and names are. Any help would be appreciated!
Guards Red
smoke screw?
 
Posts: 1
Joined: Thu Jul 21, 2016 6:47 pm

Re: Repaint with color change- help

Postby Richie O » Fri Jul 22, 2016 9:56 am

Dark grey is PS7,,,, will have to look for the other one. My 93 was that combo but I changed it all to PS7 instead of 2 tone. To lazy for 2 tone. :D
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England

Re: Repaint with color change- help

Postby Richie O » Fri Jul 22, 2016 11:08 am

Image
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Re: Repaint with color change- help

Postby DodgeFreak » Mon Jul 25, 2016 6:22 pm

your truck is sharp Richie!
92 D350 Cab and Chassis. Auto stock, wiring gremlins. 330k miles
92 W250 Ext cab rotted completely out. Auto, pump maxed, 215 ppump nozzles, Denny T2 pin.
85 D350 single wheel, converted to cummins, getrag, turned up 2 turns and afc screw flush.
User avatar
DodgeFreak
14mm rotor
 
Posts: 1701
Joined: Sat May 15, 2010 8:14 pm
Location: Iowa
Top

Re: Repaint with color change- help

Postby spencerdiesel » Sun Aug 14, 2016 5:50 pm

Good lord man.........I hadn't seen a visual of that truck since your rainy stack revving YouTube vid........Nice!!
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: Power Driven Stage 2 sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 1 turn in, timing to the head/ >1/4”
Muffler delete
spencerdiesel
14mm rotor
 
Posts: 1108
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC
Top

Re: Repaint with color change- help

Postby Richie O » Mon Aug 15, 2016 5:31 pm

Its hard to believe its been since 2007 on the paint. Still looks ok, but no winter driving.
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top


Return to Part numbers (old,new,cross reference)

Who is online

Users browsing this forum: No registered users and 1 guest

cron