Need a new throttle valve cable

How they work, how they don't work, and how to fix them

Moderators: Greenleaf, BC847, Richie O

Need a new throttle valve cable

Postby cougar » Tue Oct 25, 2022 6:33 am

I need a new TV cable for the transmission. The old one is about shot and sticks. Just starting the search and not having a lot of luck so far. Can anyone steer me toward an original OEM MOPAR cable? Not too thrilled about an aftermarket knock off considering the quality of junk coming out of China. :;-|:
RIP 91.5 W250 5 speed. The great experiment.
92 W250 HD 47RH with Compushift. Upgraded H1C to 62/60/16, Scheid Lightning VE, 60# valve springs, DAP 7X.010 injectors, 4" DE exhaust, home made cooler tubes.
01 2500 "the work truck".
cougar
14mm rotor
 
Posts: 967
Joined: Sat Apr 18, 2009 3:31 pm
Location: The Valley of no concern, AK

Re: Need a new throttle valve cable

Postby Richie O » Tue Oct 25, 2022 3:22 pm

As far as I remember the actual new dodge ones stopped being produced many years ago. The one on my 89 has a couple broken strands on the end, but I have been nursing it along.
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England

Re: Need a new throttle valve cable

Postby cougar » Wed Oct 26, 2022 6:13 am

Hey Richie, look into a Lokar KD-2518HT. Someone on another forum pointed me that way.
RIP 91.5 W250 5 speed. The great experiment.
92 W250 HD 47RH with Compushift. Upgraded H1C to 62/60/16, Scheid Lightning VE, 60# valve springs, DAP 7X.010 injectors, 4" DE exhaust, home made cooler tubes.
01 2500 "the work truck".
cougar
14mm rotor
 
Posts: 967
Joined: Sat Apr 18, 2009 3:31 pm
Location: The Valley of no concern, AK
Top

Re: Need a new throttle valve cable

Postby Richie O » Wed Oct 26, 2022 9:47 am

Thanks, will do.
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Re: Need a new throttle valve cable

Postby cougar » Wed Nov 16, 2022 7:22 am

Think I got my problems solved. I took advantage of a dead day at work and got the cable out. Cleaned it inside and out then covered the bad sheathing sections with shrink tubing with the adhesive in them. Then I pumped a low temp grease through it, one we use in aviation. Moves much more smoothly and doesn't hang up the throttle. As for the OD and lock up issue, I replaced the TPS. Works good again.
RIP 91.5 W250 5 speed. The great experiment.
92 W250 HD 47RH with Compushift. Upgraded H1C to 62/60/16, Scheid Lightning VE, 60# valve springs, DAP 7X.010 injectors, 4" DE exhaust, home made cooler tubes.
01 2500 "the work truck".
cougar
14mm rotor
 
Posts: 967
Joined: Sat Apr 18, 2009 3:31 pm
Location: The Valley of no concern, AK
Top

Re: Need a new throttle valve cable

Postby Ace » Thu Nov 17, 2022 6:16 pm

Fabricating your own parts will be the ONLY way to get stuff for these things before long.
User avatar
Ace
14mm rotor
 
Posts: 1024
Joined: Thu May 31, 2007 2:10 am
Location: CO
Top


Return to Transmission

Who is online

Users browsing this forum: No registered users and 1 guest

cron