Picked up this HE cheap today, spins freely, no shaft play what so ever. Only issue is the amount of corrosion it has, on everything. Impellers look in good shape, but the housings are rough. Don't mind throwing a rebuild kit at it if necessary, but could one tear it down, media blast the housings and center section, paint and reassemble? Will bore out the wastegate either way. Looking for a new solenoid as well, as this one is rough, and the wires were cut close to the housing, be hard to splice a new wire onto it
Or should I just clean it up and run it? Supposedly has less than 100k miles, so if that's true, it must have been a plow truck, or ran alot of highway around here. Idk how long its sat either.