help! need advice 4 inches or 6.

[pillsbury556]

Of lift that is. I drive offroad quite a bit going with the skyjacker kit and crossover highsteer. I want to clear 35s no problem and not rub when wheeling. Will 6 inches look too big for 35s?

[ahale2772]

depends on how tall the truck is now, I can clear 37's with about 3 inches of lift up front, and cut fenders, you will probably be fine with 4 inches and 35's

although a crossover is usually a bit cleaner the more the lift...

[oldestof11]

I have 33's on a stock height so I would think a 2-4" would suffice.

[pillsbury556]

Im worried that 4 inches wont make enough room for the high steer. Ugh i hate expensive decisions

[Diesel Dawg]

youll probably need 6 for the cross steer.

[u2slow]

Guys have done crossover steer with 2" of lift. IMO, go with 4" lift. Less stress on the cv, and you may get by without lengthening the shaft.

I have 35's on stock (sagged) with only a tiny bit of rubbing.

[remi]

I'm running 35s with 4 inch lift and it seems fine.
i want to do that cross over steer where can you get it form

[bmoeller]

The 4" lift isn't enough on the 92 I had. The 35s rub on turns, with a modest droop or rise. Fine on the flat.