Hey guys pulling season is coming up pretty quick and I'm in need of some more power. Last year I didn't do to well but i did beat some stock commonrails and powerstrokes. My truck is 6200lbs with 3.54 gears and 235s. I want enough power to run 3rd low. I have dap 5x.012s a hx40 a fass pump and one of kennys dual discs. What do I need for 3rd?
Have you done most of the pump/throttle linkage/throttle cable mods to get as much RPM/fuel as you can out of it? Do you also have an open exhaust and some sort of decent intake system?
What is your full mod list?
You might just want to drop a tire size or something if it's feasible.
1990 W250 4x4 Rattles, growls, whistles, and whines.
I have all the usual pump mods and it's got a 4 inch down pipe to the t-case and 5 inch from there. The intake is just a bhaf. I can't really drop tire size cause a 235 is pretty damn small and I don't think it would make enough of a difference
But the power it takes to turn 33's is not there. That is a gear almost like 4th and low on a 6 spd. I could almost do it but the power is not there to take you down the track.
Jon 93 D250~ Mismatch of cheap parts, trying to look fast going slow
Wouldn't a bigger tire make it a faster gear? The 40 has a 16 housing and I have no problem staying on top of it. I just need to figure something out without blowing a bunch of money on parts I don't need because I'm sure that money will be spent on repairs if it will run like I want it. 2nd low just isn't any fun and i want to place better than 5th or 6th out of 10 everytime.