ARP head studs sale.

Off topic/not diesel related

Moderators: Greenleaf, BC847, Richie O

ARP head studs sale.

Postby mprmn08 » Thu Jul 09, 2009 5:00 pm

Just so everyone knows my shop is selling 12 valve arp head studs for $425 dollars to anyone who calls and says chris (me) sent them. they are trying to get more into the diesel market also so they figured if they can get some guys buying from them hopefully that will help. so if anyone is ready for them or when they are ready for them give them a call. Its C-Tech performance and the number is 616-534-6946 and tell them chris sent you. they'll hook you up. thats over 100 below retail just incase your wondering also.

p.s. price doesnt include tax and shipping if you need it but it shouldnt be to bad. tax should only be about $20.
93 w250 reg cab. rigged up stock downpipe to 4 inch to 5 inch exhaust from p.o. mild pump tweaks and all other stock for now. Project "smoke a little smoke". www.c-techperformance.com
User avatar
mprmn08
14mm rotor
 
Posts: 507
Joined: Fri Apr 11, 2008 12:12 pm
Location: Grandville, MI

Postby mprmn08 » Wed Jul 22, 2009 4:55 pm

wow no one is in the need for head studs?? man i figured at least a few people would be on this.
93 w250 reg cab. rigged up stock downpipe to 4 inch to 5 inch exhaust from p.o. mild pump tweaks and all other stock for now. Project "smoke a little smoke". www.c-techperformance.com
User avatar
mprmn08
14mm rotor
 
Posts: 507
Joined: Fri Apr 11, 2008 12:12 pm
Location: Grandville, MI

Postby Richie O » Wed Jul 22, 2009 5:50 pm

I would but no money, no funny. :x
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Postby soggy » Wed Jul 22, 2009 9:23 pm

you can get them for slightly under that in a lot of places. They've come down quite a bit since the 625s came out.
92 W250 VE Powered

13.31@ 98.92

1993 D350 Tow Rig
soggy
fuel screw!!!!
 
Posts: 365
Joined: Sat Oct 25, 2008 1:31 pm
Location: Centerville, WA
Top

Postby mprmn08 » Thu Jul 23, 2009 4:45 pm

well i guess we'll have to change suppliers then if that is true. cause msrp through our supplier is like 550 i think.
93 w250 reg cab. rigged up stock downpipe to 4 inch to 5 inch exhaust from p.o. mild pump tweaks and all other stock for now. Project "smoke a little smoke". www.c-techperformance.com
User avatar
mprmn08
14mm rotor
 
Posts: 507
Joined: Fri Apr 11, 2008 12:12 pm
Location: Grandville, MI
Top

Postby soggy » Thu Jul 23, 2009 10:33 pm

92 W250 VE Powered

13.31@ 98.92

1993 D350 Tow Rig
soggy
fuel screw!!!!
 
Posts: 365
Joined: Sat Oct 25, 2008 1:31 pm
Location: Centerville, WA
Top

Postby mprmn08 » Sat Jul 25, 2009 5:09 pm

wow, ok. i guess we'll have to do some seachin for a new supplier or something. honeslty i hope no one thinks i was tryin to jip them or anything but the price i listed was what our supplier says is 125 below msrp. again guys sorry on our shops behalf.
93 w250 reg cab. rigged up stock downpipe to 4 inch to 5 inch exhaust from p.o. mild pump tweaks and all other stock for now. Project "smoke a little smoke". www.c-techperformance.com
User avatar
mprmn08
14mm rotor
 
Posts: 507
Joined: Fri Apr 11, 2008 12:12 pm
Location: Grandville, MI
Top

Postby Richie O » Sun Jul 26, 2009 6:57 am

MSRP is like LIST price. They are kinda a gimmick. No sweat, we won't hold it against ya. :D
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top


Return to Lounge

Who is online

Users browsing this forum: No registered users and 12 guests