1stGen.org

THE place for 1st gens

Skip to content

crossover steering

everything but the drivetrain

Moderators: Greenleaf, BC847, Richie O

Post a reply

Re: crossover steering

Postby BILTIT » Tue Jul 19, 2011 1:53 pm

I spoke to them today, they said the studs will be in tomorrow and i should see the kit within a week.
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top

Re: crossover steering

Postby BILTIT » Thu Jul 28, 2011 9:56 am

Studs and all shipped yesterday.
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top

Re: crossover steering

Postby BILTIT » Wed Aug 03, 2011 5:55 pm

Received the kit today if anyone has questions or would like pics.
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top

Re: crossover steering

Postby ahale2772 » Wed Aug 03, 2011 6:04 pm

everyone loves pictures!
84 CCLB W350 project
94' W350 Dually, Diesel, Auto 1080HP/1980FTlbs
User avatar
ahale2772
14mm rotor
 
Posts: 2353
Joined: Tue Jul 21, 2009 9:43 am
Location: massachusetts
Top

Re: crossover steering

Postby BILTIT » Wed Aug 03, 2011 6:28 pm

Image

Image

Image

Image

Image

Image

Image

This is the crossover kit with additional drivers side cap and kingpin repair kits.
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top

Re: crossover steering

Postby BILTIT » Wed Aug 03, 2011 6:30 pm

Hmmm, not sure why it cut off half the pics?
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top

Re: crossover steering

Postby dazedandconfused » Wed Aug 03, 2011 6:41 pm

BILTIT wrote:Hmmm, not sure why it cut off half the pics?

It's your board settings they show up fine to me.
Big Andy
1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
User avatar
dazedandconfused
14mm rotor
 
Posts: 6119
Joined: Thu Apr 05, 2007 6:25 pm
Location: Walton, Kentucky
Top

Re: crossover steering

Postby BILTIT » Wed Aug 03, 2011 6:42 pm

Do you know which setting it is? I looked but couldn't find anything.


Ah found it, good as gold now.
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top

Re: crossover steering

Postby ahale2772 » Wed Aug 03, 2011 6:44 pm

Billit, will you be bracing the frame?
84 CCLB W350 project
94' W350 Dually, Diesel, Auto 1080HP/1980FTlbs
User avatar
ahale2772
14mm rotor
 
Posts: 2353
Joined: Tue Jul 21, 2009 9:43 am
Location: massachusetts
Top

Re: crossover steering

Postby BILTIT » Wed Aug 03, 2011 6:47 pm

Yes, i have this kit.

http://ramchargercentral.com/fabricatio ... -supports/
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top

Re: crossover steering

Postby 1990 » Thu Aug 04, 2011 3:50 pm

Will be looking into the northwest fab setup.
2012 Subaru WRX TP Stage 1 DD
1990 D250 4WD CONVERSION Retired
User avatar
1990
fuel screw!!!!
 
Posts: 341
Joined: Thu Jun 10, 2010 12:51 pm
Location: Alberta, Canada
Top

Re: crossover steering

Postby manyholes » Sun Sep 04, 2011 5:32 am

my studs finally came in about 10 days ago, still waiting on the proper front springs for my truck. they're decent enough guys to deal with but slow as hell with shipping. chris has been real good about dealing with my issues with their kit
1990 W250 dodge ex cab, LB, work in progress. truck was originally reg cab/lb, ex cab is an add on.fuel pin turned, 30psi, bhaf, straight piped 3", new rear springs with shackle flip, 4" lift front, crossover steering, waiting on piston lp, c/c s/b conversion, turbo upgrade and intercooler install
manyholes
fuel screw!!!!
 
Posts: 83
Joined: Sat Oct 16, 2010 8:30 pm
Top

Re: crossover steering

Postby BILTIT » Sun Sep 04, 2011 8:05 am

Agreed, they are slow but good to deal with. I am having issues with the pitman arm they sent and they are looking for a fix but i am trying things myself as they are much too slow. I have had to borrow a truck a few times already because mine has been down for 1.5 weeks waiting for this part. Hoping to have it fixed up end of this week, then i can inform NWF with what pitman arm they need to use to make there kit fit on a stock height first gen which it does not right now.
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top

Re: crossover steering

Postby ss_storm » Tue Mar 20, 2012 12:22 pm

@BILTIT Any updates on the NWF crossover?
How do you guys like your crossover steering on the street? (this is where my truck spends 90% of its time)
ss_storm
fuel pin?
 
Posts: 14
Joined: Mon Jan 16, 2012 6:53 pm
Top

Re: crossover steering

Postby BILTIT » Tue Mar 20, 2012 12:52 pm

Yup, actually just finished it up and took it for the first test drive last night. Seems to be working well but hard to tell because we had a foot of fresh snow and i only have front wheel drive. Getting a rear shaft tomorrow and then i can test drive it some more.

I have been posting my progress here instead:

http://www.dieseltruckresource.com/dev/ ... 91427.html


My truck is on-road as well. I had crossover in my old chev and loved it so i can't see the dodge being any different.
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top
PreviousNext
Post a reply

Return to Chassis

Who is online

Users browsing this forum: No registered users and 55 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
cron